LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> PT Cruiser L4-2.4L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Cylinder Head Assembly >> Rocker Arm Assembly >> Service and Repair >> Removal and Replacement >> Valve Rocker Arm - Installation

Valve Rocker Arm - Installation






INSTALLATION










1. Lubricate rocker arm with clean engine oil.
2. Using Valve Spring Compressor 8215A (1) and Adapter 8436 (2) slowly depress valve assembly until rocker arm can be installed on the hydraulic lifter and valve stem.
3. Repeat installation procedure for each rocker arm.
4. Install spark plugs.
5. Install cylinder head cover Cylinder Head Cover(s) - Installation.

scientia non olet · About LEMON Manuals