Front Bumper Fascia - Removal

REMOVAL





1. Remove grille. Grille - Removal.
2. Remove three screws attaching splash shield to fascia to access fender flange on each side of vehicle.
3. Remove spring nuts fasteners attaching fascia to fender flange.
4. Raise and support vehicle. Service and Repair.
5. Remove three screws attaching air dam (3) and lower fascia to the radiator support crossmember.
6. Lower vehicle.





7. Remove two fasteners attaching fascia (2) to the fender bracket.
8. Remove fascia to access the fog lamp wire connectors and disconnect, if equipped.










9. Remove fascia (1) from vehicle.
10. Move fascia to a bench.
11. Remove the air dam, retaining fasteners, foam, and fog lamps if equipped.Grille - Removal.
12. Remove lower radiator grille (4), if equipped.