LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Traverse FWD V6-3.6L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> Repair Instructions >> Engine Flywheel Removal

Engine Flywheel Removal




Engine Flywheel Removal

Special Tools

EN 46106 - Flywheel Holding Tool




1. Install the EN 46106 - flywheel holding tool through the starter mounting hole.




2. Remove the engine flywheel bolts and discard.




3. Remove the engine flywheel from the crankshaft.




4. Remove the EN 46106 - flywheel holding tool.

scientia non olet · About LEMON Manuals