LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Traverse FWD V6-3.6L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> Repair Instructions >> Drive Belt Tensioner Installation

Drive Belt Tensioner Installation




Drive Belt Tensioner Installation





1. Place the left drive belt tensioner assembly in position to the engine front cover.

Caution:
Refer to Fastener Caution Fastener Caution.

2. Install the left drive belt tensioner bracket bolts and tighten to 25 Nm (18 lb ft).

scientia non olet · About LEMON Manuals