LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Silverado 1500 4WD V6-4.3L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> 4L60-E/4L65-E/4L70-E - Automatic Transmission >> Repair Instructions >> Input Speed Sensor Removal

Input Speed Sensor Removal




Input Speed Sensor Removal





1. Remove the input speed sensor (ISS) retaining bolt (247).

2. Use a small tipped screwdriver to carefully pry the ISS wiring harness retaining brackets from the pump housing. Being careful not to damage retainer clips.

3. Remove the ISS assembly (250).