5. Crankshaft Rear Oil Seal Removal

Crankshaft Rear Oil Seal Removal

Tools Required

J 44641 Crankshaft Rear Oil Seal Remover





1. Install the button of J 44641 into the crankshaft.

2. Press the jaws of J 44641 into the felt portion of the seal far enough to engage the inner lip of the seal.

3. While holding the jaws of J 44641 tightly to the seal's inner sleeve, tighten the jaw bolts.

4. Remove the crankshaft rear oil seal using the J 44641.