77. 1-2 Accumulator Assemble

1-2 Accumulator Assemble





1. Inspect the 1-2 accumulator piston (56) for the following conditions:

* Porosity

* Cracks

* Scoring

* Nicks and Scratches

2. Install a 1-2 accumulator piston oil seal ring (55) on the 1-2 accumulator piston (56).





3. Inspect the 1-2 accumulator housing for the following conditions:

* Porosity

* Cracks

* Scoring

* Nicks and Scratches

* Debris or blocked passages





Note:
Some models may not use an outer 1-2 accumulator spring (54). Refer to 1-2 Accumulator Piston Spring Selection 1-2 Accumulator Piston Spring Selection.

4. Install the 1-2 inner (104) and outer (54) accumulator springs.

5. Install the 1-2 accumulator piston (56).