Stabilizer Link: Service and Repair

Removal Procedure
1. Raise the vehicle and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation in Wheels, Tires and Alignment.





3. Remove the stabilizer shaft link bolt and nut.
4. Remove the stabilizer shaft link and insulators.

Installation Procedure
1. Install the stabilizer shaft link and insulators.

Notice: Refer to Fastener Notice in Service Precautions.





2. Install the stabilizer shaft link bolt and nut.
^ Tighten the stabilizer shaft link nut to 23 Nm (17 ft. lbs.).
3. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation in Wheels, Tires and Alignment.
4. Lower the vehicle.