115. Timing Chain Idler Sprocket Installation - Right Side

Timing Chain Idler Sprocket Installation - Right Side





1. Ensure that the right camshaft intermediate drive chain idler (1) is being installed. The recessed hub (4) and the smaller sprocket of the right camshaft intermediate drive chain idler is installed outward. The raised hub and the larger sprocket of the right camshaft intermediate drive chain idler is installed towards the block.





2. Install the right camshaft intermediate drive chain idler.

Caution:
Refer to Fastener Caution Fastener Caution.

3. Install the camshaft intermediate drive chain idler bolt and tighten to 58 Nm (43 lb ft).