Oil Pick Up/Strainer: Service and Repair

Oil Pump Suction Pipe and Screen Assembly Replacement

Removal Procedure

1. Remove the oil pan. Refer to Oil Pan Replacement Service and Repair.





2. Remove the oil pan scraper bolts.

3. Remove the oil pan scraper.





4. Remove the oil suction pipe bolts.

5. Remove the oil suction pipe.





6. Remove the oil suction tube seal from the oil suction tube. Discard the oil suction tube seal.

Installation Procedure





1. Install a NEW oil suction tube seal onto the oil suction tube. DO NOT reuse the old oil suction tube seal.





2. Install the oil suction pipe.

Caution:
Refer to Fastener Caution Fastener Caution.

3. Install the oil suction pipe bolts and tighten to 10 Nm (89 lb in).





4. Install the oil pan scraper.

5. Install the oil pan scraper bolts and tighten to 10 Nm (89 lb in).

6. Install the oil pan. Refer to Oil Pan Replacement Service and Repair.