85. Timing Belt Idler Pulley Installation

Timing Belt Idler Pulley Installation

1. Clean the timing belt idler pulley thread.





Caution: Refer to Fastener Caution Fastener Caution.

Caution: Refer to Torque-to-Yield Fastener Caution Torque-to-Yield Fastener Caution.

2. Install the timing belt idler pulley (2) and the NEW bolt (1) with screw locking compound. Refer to Adhesives, Fluids, Lubricants, and Sealers Adhesives, Fluids, Lubricants, and Sealers.
3. Tighten the NEW bolt (1) to 25 Nm (18 lb ft).