LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Impala V6-3.9L >> Repair and Diagnosis >> Transmission and Drivetrain >> Transmission Control Systems >> Actuators and Solenoids - Transmission and Drivetrain >> Actuators and Solenoids - A/T >> Shift Solenoid >> Service and Repair >> 1-2 Shift Solenoid Valve Replacement

1-2 Shift Solenoid Valve Replacement




1-2 Shift Solenoid Valve Replacement

Removal Procedure

1. Remove the case side cover. Refer to Control Valve Body Cover Replacement (Control Valve Body Cover Replacement).
2. Disconnect the 1-2 shift solenoid electrical connector.
3. Remove the 1-2 shift solenoid retaining clip (314D)




4. Remove the 1-2 shift solenoid (315A).

Installation Procedure




1. Install the 1-2 shift solenoid (315A).
2. Install the 1-2 shift solenoid retaining clip (314D).
3. Connect the 1-2 shift solenoid electrical connector.
4. Install the case side cover. Refer to Control Valve Body Cover Replacement (Control Valve Body Cover Replacement).

scientia non olet · About LEMON Manuals