30. 1-2 Support Drum and Forward Band Removal

1-2 Support Drum and Forward Band Removal

Special Tools

J 38358-A - 1-2 Support Remover and Installer

For equivalent regional tools, refer to Special Tools (Tools and Equipment).




1. Install J 38358-A - remover and installer onto the 1-2 support drum assembly (683-687).
2. Lift J 38358-A - remover and installer with the 1-2 support drum out of the case.




3. Tilt the forward band assembly (688) in order to disengage the band from the anchor pin in the case. Remove the forward band assembly.