LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Cruze L4-1.8L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> 5. Crankshaft Balancer Removal

5. Crankshaft Balancer Removal




Crankshaft Balancer Removal

Special Tools

EN-652 - Flywheel Holder

For equivalent regional tools, refer to Special Tools (Special Tools).




1. Install the EN-652 - holder (1). Lock the flywheel (2) or the automatic transmission flex plate via the starter ring gear.




2. Remove the bolt (1) and the crankshaft balancer (2).

scientia non olet · About LEMON Manuals