Radio Antenna Base Replacement

Radio Antenna Base Replacement

Removal Procedure

1. Remove headlining trim panel. Refer to Headlining Trim Panel Replacement (with Sunroof) (Headlining Trim Panel Replacement (With Sunroof))Headlining Trim Panel Replacement (without Sunroof) (Headlining Trim Panel Replacement (Without Sunroof)).




2. Remove the radio antenna base bolt (1).




3. Remove the radio antenna base (1).
4. Disconnect the electrical connectors.

Installation Procedure

1. Connect the electrical connectors.




2. Install the radio antenna base (1).





Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the radio antenna base bolt (1) and tighten to 9 Nm(80 lb in).
4. Install the headlining trim panel. Refer to Headlining Trim Panel Replacement (with Sunroof) (Headlining Trim Panel Replacement (With Sunroof))Headlining Trim Panel Replacement (without Sunroof) (Headlining Trim Panel Replacement (Without Sunroof)).