27. Camshaft Removal

Camshaft Removal (6.2L LS3)




1. Remove the camshaft retainer bolts (204) and retainer (203).





Caution: All camshaft journals are the same diameter, so care must be used in removing or installing the camshaft to avoid damage to the camshaft bearings.

2. Remove the camshaft.

1. Install the camshaft sprocket bolt into the camshaft front bolt hole.
2. Using the bolt as a handle, carefully rotate and pull the camshaft out of the engine block.
3. Remove the bolt from the front of the camshaft.