LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2011 >> Corvette V8-6.2L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Intake Manifold >> Service and Repair >> Upper Intake Manifold Sight Shield Replacement

Upper Intake Manifold Sight Shield Replacement




Upper Intake Manifold Sight Shield Replacement (w/o LS9)

Removal Procedure




1. Remove the oil filler cap (1), if needed.
2. Remove the right engine sight shield (2), if needed.
3. Remove the left engine sight shield (3), if needed.

Installation Procedure




1. Install the left engine sight shield (3), if needed.
2. Install the right engine sight shield (2), if needed.
3. Install the oil filler cap (1), if needed.

scientia non olet · About LEMON Manuals