Diagnostic System Check

A Diagnostic System Check - Theft Deterrent:

DIAGNOSTIC AIDS
Use J 35616-A when probing or testing electrical connector terminals. Refer to Testing for Intermittent and Poor Connections.

TEST DESCRIPTION
The numbers below refer to the step numbers on the diagnostic table.
2. Lack of communication may be due to a partial malfunction of the class 2 serial data circuit or due to a total malfunction of the class 2 serial data circuit. The specified procedure will determine the particular condition.
4. The presence of DTCs which begin with "U" indicate some other module is not communicating. The specified procedure will compile all the available information before tests are performed.