Sunroof / Moonroof Panel: Service and Repair

Sunroof Window Replacement

Removal Procedure




1. Open the sunshade.
2. Remove the window panel screws (1) on both sides.
Important: If operating the sunroof without the window, refer to Sunroof Air Deflector Replacement (Service and Repair).


Remove the sunroof window, being careful not to scratch the roof surface.

Installation Procedure




1. Position the sunroof window (3) into the opening.
2. Install the sunroof window screws (1). Do not tighten the screws.
3. Adjust the sunroof window. Refer to Sunroof Window Height and Opening Fit Adjustment (Adjustments).