Sunroof Housing Rear Drain Hose Replacement

Sunroof Housing Rear Drain Hose Replacement

Removal Procedure




1. Lower the headliner in order to access the rear drain hose connections. Refer to Headlining Trim Panel Replacement (Without PLA) (Headlining Trim Panel Replacement (Without PLA))Headlining Trim Panel Replacement (With PLA) (Headlining Trim Panel Replacement (With PLA)).
2. Cut the tie wraps from the rear drain hoses.
3. Disconnect the drain hoses from the sunroof module assembly drain spouts.
4. Remove the upper portion of the rear drain hoses from the retaining clips.




5. Remove the RH rear compartment trim. Refer to Rear Compartment Side Trim Replacement - Right Side (Rear Compartment Side Trim Replacement - Right Side).
6. Remove the lower portion of the rear drain hoses from the retaining clips.
7. Remove the drain hose from the vehicle.

Installation Procedure

1. Position the rear drain hose up through the rear shelf panel.




2. Clip the lower portion of the rear drain hoses into position.
3. Install the rear compartment trim. Refer to Rear Compartment Side Trim Replacement - Right Side (Rear Compartment Side Trim Replacement - Right Side).




4. Secure the upper portion of the rear drain hoses into position.

Important: When installing the new drain hose tie wraps, position the tie wraps in order to maintain clearance between the tie wraps and the headliner.


5. Secure the drain hoses to the sunroof module assembly drain spouts with new tie wraps.
6. Install the headliner to the roof. Refer to Headlining Trim Panel Replacement (Without PLA) (Headlining Trim Panel Replacement (Without PLA))Headlining Trim Panel Replacement (With PLA) (Headlining Trim Panel Replacement (With PLA)).