LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> XLR V8-4.6L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Drive Belt Tensioner >> Service and Repair >> Drive Belt Tensioner Replacement

Drive Belt Tensioner Replacement




Drive Belt Tensioner Replacement

Removal Procedure




1. Remove the drive belt. Refer to Drive Belt Replacement (Drive Belt Replacement).
2. Remove the drive belt tensioner bolt (2).
3. Remove the drive belt tensioner (1).

Installation Procedure




1. Install the drive belt tensioner (1).

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the drive belt tensioner bolt (2) and tighten to 50 Nm (37 lb ft).
3. Install the drive belt. Refer to Drive Belt Replacement (Drive Belt Replacement).

scientia non olet · About LEMON Manuals