Exhaust Manifold Heat Shield Replacement - Right Side

Exhaust Manifold Heat Shield Replacement - Right Side (LY7) (3.6L)

Removal Procedure
Warning: Refer to Exhaust Service Warning (Service Precautions).

Warning: Refer to Protective Goggles and Glove Warning (Protective Goggles and Glove Warning).





1. Remove the exhaust manifold heat shield bolts.
2. Remove the exhaust manifold heat shield.

Installation Procedure




1. Install the exhaust manifold heat shield.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the exhaust manifold heat shield bolts and tighten to 10 Nm (89 lb in).