LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> XLR V8-4.6L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Idler Pulley >> Service and Repair

Idler Pulley: Service and Repair



Drive Belt Idler Pulley Replacement

Removal Procedure

1. Remove the drive belt. Refer to Drive Belt Replacement (Drive Belt Replacement) .




2. Remove the drive belt idler pulley bolt.
3. Remove the drive belt idler pulley.



Installation Procedure





1. Install the drive belt idler pulley.

Notice: Refer to Fastener Notice (Fastener Notice) .

2. Install the drive belt idler pulley bolt.

Tighten the drive belt idler pulley bolt to 50 N.m (37 lb ft).

3. Install the drive belt. Refer to Drive Belt Replacement (Drive Belt Replacement) .


scientia non olet · About LEMON Manuals