Automatic Volume Control: Service and Repair

Radio Volume Compensator Interior Noise Microphone Replacement

Removal Procedure

1. Remove the overhead console. Refer to Roof Console Replacement (Service and Repair) .




2. Remove the screws securing the microphone (2) to the overhead console.
3. Disconnect the electrical connector.



Installation Procedure





1. Connect the electrical connectors.

Notice: Refer to Fastener Notice (Fastener Notice) .

2. Install the screws securing the microphone (2) to the overhead console.

Tighten the screws to 2 N.m (18 lb in).

3. Install the overhead console. Refer to Roof Console Replacement (Service and Repair) .