Radio Antenna Module Replacement

Radio Antenna Module Replacement

Removal Procedure

1. Lower the rear of the headliner. Refer to Headlining Trim Panel Replacement (Service and Repair) .




2. Remove the bolt securing antenna module to the roof.
3. Disconnect the electrical connectors.



Installation Procedure





1. Connect the electrical connectors.

Notice: Refer to Fastener Notice (Fastener Notice) .

2. Install the bolt securing the antenna module to the roof.

Tighten the bolts (1) to 9 N.m (80 lb in).

3. Install the headliner. Refer to Headlining Trim Panel Replacement (Service and Repair) .