Torque Converter Cover: Service and Repair

Torque Converter Cover Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).




2. Remove the torque converter cover bolts.
3. Remove the torque converter covers.

Installation Procedure





Important: If equipped with 5.3L V8-The tab must be on the engine side of the engine oil pan bolt.


1. Install the torque converter covers.

Notice: Refer to Fastener Notice (Fastener Notice).

2. Install the torque converter cover bolts.

Tighten the bolts to 10 N.m (89 lb in).

3. Lower the vehicle.