LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2008 >> Allure (CANADA) V6-3.6L >> Repair and Diagnosis >> Sensors and Switches >> Sensors and Switches - HVAC >> Discharge Air Temperature Sensor / Switch >> Service and Repair >> Air Temperature Sensor Replacement - Upper Left Side

Air Temperature Sensor Replacement - Upper Left Side



Air Temperature Sensor Replacement - Upper Left Side

Removal Procedure

1. Remove the radio. Refer to Radio Replacement (Radio Replacement).





Important: Rotate the upper air temperature sensor counter-clockwise to disengage from the heater outlet cover.


2. Remove the upper left air temperature sensor from the center air duct.
3. Disconnect the electrical connector from the upper left air temperature sensor.

Installation Procedure





Important: Rotate the upper air temperature sensor clockwise to engage the sensor to the heater outlet cover.


1. Install the upper left air temperature sensor to the center air duct.
2. Connect the upper left air temperature sensor electrical connector.
3. Install the radio. Refer to Radio Replacement (Radio Replacement).