Ambient Temperature Sensor / Switch HVAC: Service and Repair

Ambient Air Temperature Sensor Replacement

Removal Procedure

1. Remove the upper air deflector. Refer to Radiator Air Upper Baffle and Deflector Replacement (Service and Repair).




2. Push inward on the retaining tabs (1) to disengage the ambient air temperature sensor.
3. Disconnect the electrical connector from the ambient air temperature sensor.

Installation Procedure

1. Connect the ambient air temperature sensor electrical connector to the ambient air temperature sensor.




2. Align the retaining tabs (1) to the bottom side of the ambient air temperature sensor hole.
3. Push upwards to install the ambient air temperature sensor to the vehicle.
4. Install the upper air deflector. Refer to Radiator Air Upper Baffle and Deflector Replacement (Service and Repair).