Trunk / Liftgate Switch: Service and Repair

Rear Compartment Lid Ajar Indicator Switch Replacement

Removal Procedure




1. Open the rear compartment.
2. Remove the rear compartment lid latch. Refer to Rear Compartment Lid Latch Replacement (Service and Repair).
3. Remove the screw (5) from the rear compartment lid ajar/lid lamp switch.
4. Remove the electric connector.
5. Remove the rear compartment lid ajar/lid lamp switch.

Installation Procedure




1. Position the rear compartment lid ajar switch to the rear compartment lid latch.
2. Install the electric connector.

Notice: Refer to Fastener Notice.

3. Install the screw (5) to the rear compartment lid ajar/lid lamp switch.

Tighten the rear compartment lid ajar switch screw to 5 N.m (44 lb in).

4. Install the rear compartment lid latch. Refer to Rear Compartment Lid Latch Replacement (Service and Repair).
5. Close the rear compartment.