Seat Belt Replacement - Center Rear

Seat Belt Replacement - Center Rear

Removal Procedure





1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement (Rear Seat Cushion Replacement).
2. Remove the center seat belts nuts (1).
3. Remove the center seat belts from the vehicle.



Installation Procedure


Important: Verify that the rear seat belt anchors are installed in their proper orientation.






1. Install the center seat belts to the vehicle.

Notice: Refer to Fastener Notice.

2. Install the center seat belts nuts (1).

Tighten the nuts to 42 N.m (31 lb ft).


Important: Be sure to route the buckle correctly through the rear seat cushion.


3. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement (Rear Seat Cushion Replacement).