Harmonic Balancer - Crankshaft Pulley: Service and Repair

Crankshaft Balancer Replacement

Tools Required

J 41816-A Harmonic Balancer Puller

Removal Procedure




1. Remove the accessory drive belt. Refer to Drive Belt Replacement (Service and Repair).
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
3. Use the J 41816-A in order to remove the crankshaft balancer. Refer to Crankshaft Balancer Removal (Overhaul).

Installation Procedure




1. Install the crankshaft balancer. Refer to Crankshaft Balancer Installation (Overhaul).
2. Install the accessory drive belt. Refer to Drive Belt Replacement (Service and Repair).
3. Lower the vehicle.