LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2012 >> TL AWD V6-3.7L >> Repair and Diagnosis >> Accessories and Optional Equipment >> Radio, Stereo, and Compact Disc >> Testing and Inspection >> Symptom Related Diagnostic Procedures >> Audio Disc Does Not Load (Without Navigation)

Audio Disc Does Not Load (Without Navigation)




Audio System Symptom Troubleshooting - Audio disc does not load

Audio disc does not load (without navigation)

NOTE:

- Check the vehicle battery condition first Battery Test.
- Check the connectors for poor connections or loose terminals.
- Disc labels should not be used in the audio unit. They may jam and damage the player mechanism.
- Make sure the audio disc is compatible with the system.

1. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode.

2. Insert a known-good disc to see if the symptom can be duplicated.

Does the disc load?

YES -

Operation is normal. If the disc loads normally, but will not play, go to Audio disc does not play troubleshooting Audio Disc Does Not Play (Without Navigation).

NO -

Go to step 3.

3. Insert another disc.

Does the disc load?

YES -

The original disc is faulty.

NO -

Replace the audio unit Audio Unit Removal / Installation.