Fuel Pressure Regulator: Service and Repair

Fuel Pressure Regulator Replacement

NOTE: If the fuel tank is full, drain the fuel Service and Repair.

1. Remove the fuel tank unit Fuel Tank Unit Removal/Installation.

2. Remove the fuel pressure regulator (A).





3. Install the parts in the reverse order of removal with a new O-ring (B).

NOTE:

- Coat the O-ring with clean engine oil; do not use any other oils or fluids.
- Do not pinch the O-ring during installation.
- Use all the new parts supplied in the pressure regulator replacement kit.

4. Install the fuel tank unit Fuel Tank Unit Removal/Installation.