LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2011 >> RL V6-3.7L >> Repair and Diagnosis >> Accessories and Optional Equipment >> Collision Avoidance and Parking Assist Systems >> Rear Vision Camera >> Service and Repair

Rear Vision Camera: Service and Repair




Rearview Camera Removal/Installation

1. Remove the trunk lid trim Interior Trim Removal / Installation - Trunk Lid.

2. Disconnect the 6P connector (A) from the rearview camera (B).





3. Remove the clip (C).

4. Pull out the rearview camera assembly.

5. Install the rearview camera in the reverse order of removal.