Panoramic Glass Roof Motor Replacement

Panoramic Glass Roof Motor Replacement

NOTE: Put on gloves to protect your hands.

Panoramic glass roof control unit/motor

1. Remove the headliner Service and Repair.

2. Disconnect the panoramic glass roof control unit/motor connector (A), and remove the TORX screws with a T25 TORX bit, then remove the panoramic glass roof control unit/motor (B).





3. Install the motor in the reverse order of removal, and note these items:

- Make sure the panoramic glass roof control unit/motor connector is plugged in properly.
- Reset the panoramic glass roof control unit Programming and Relearning.
- Check the motor operation.

Power sunshade control unit/motor

4. Remove the headliner Service and Repair.

5. Disconnect the power sunshade control unit/motor connector (A), and remove the TORX screws with a T25 TORX bit, then remove the power sunshade control unit/motor (B).





6. Install the motor in the reverse order of removal, and note these items:

- Make sure the connector is plugged in properly.
- Reset the panoramic glass roof control unit Programming and Relearning.
- Check the motor operation.