Front Crankshaft Seal: Service and Repair

Cam Chain Case Oil Seal Installation

Special Tools Required

- Driver handle, 15 x 135L 07749-0010000
- Bearing driver attachment, 52 x 55 mm 07746-0010400
1. Use the driver handle 15 x 135L and the bearing driver attachment, 52 x 55 mm to drive a new oil seal squarely into the chain case to the specified installed height.






2. Measure the distance between the chain case surface and the oil seal.

Oil Seal Installed Height:
32.4-33.1 mm (1.28-1.30 in)