Brake Pedal Position Switch Test

Brake Pedal Position Switch Test

1. Disconnect the 4P connector (A) from the brake pedal position switch (B).

2. Check for continuity between terminals No. 1 and No. 2.
- There should be continuity when the brake pedal is pressed.

- There should be no continuity when the brake pedal is released.

3. Check for continuity between terminals No. 3 and No. 4.
- There should be no continuity when the brake pedal is pressed.

- There should be continuity when the brake pedal is released.

4. If necessary, adjust or replace the switch, or adjust the pedal height. Brake Pedal and Brake Pedal Position Switch Adjustment