LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2010 >> RL V6-3.7L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Drive Belt Tensioner >> Service and Repair >> Drive Belt Auto-Tensioner Pulley Replacement

Drive Belt Auto-Tensioner Pulley Replacement




Drive Belt Auto-tensioner Pulley Replacement

1. Remove the auto-tensioner. Drive Belt Auto-Tensioner Replacement

2. Remove the pulley bolt (A) (left-hand threads), and remove the tensioner pulley (B).

3. Install the tensioner pulley in the reverse order of removal.





scientia non olet · About LEMON Manuals