LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2010 >> RL V6-3.7L >> Repair and Diagnosis >> Accessories and Optional Equipment >> Radio, Stereo, and Compact Disc >> Testing and Inspection >> Symptom Related Diagnostic Procedures >> Audio Disc Does Not Play

Audio Disc Does Not Play




Symptom Troubleshooting: Audio disc does not play

Special tools required

- Diagnostics CD 07AAZ-SDBA100

Audio disc does not play

NOTE:

- Check the vehicle battery condition first. Testing and Inspection

- Check the connectors for poor connections or loose terminals.

- Disc labels should not be used in the audio unit. They may jam, and damage the player mechanism.

1. Turn the ignition switch to ON (II).

2. Turn on the audio unit, and try loading a disc.

Does the disc load?
YES - Go to step 3.

NO - Go to audio disc does not load. Symptom Troubleshooting


3. Insert a known-good disc to see if the symptom can be duplicated.

Does the disc play?
YES - Operation is normal.

NO - Go to step 4.


4. Insert audio diagnostic CD (T/N 07AAZ-SDBA100) in the audio unit.

Does the disc play?
YES - The original disc is faulty or has an unreadable format.

NO - Substitute a known-good audio unit, Audio Unit Removal/Installation and recheck. If the symptom/indication goes away, replace the original audio unit. Audio Unit Removal/Installation