Error Code: XM Antenna Is Displayed
Error code: XM ANTENNA is displayed1. Check the connector at the XM receiver (without AcuraLink) or the AcuraLink control unit (XM receiver) (with AcuraLink).
Is the connector connected?
YES - Go to step 2
NO - Reconnect the connector. If the error message does not go away, go to step 2.
2. Check the connector at the XM antenna.
Is the connector connected?
YES - Go to step 3.
NO - Reconnect the connector. If the error message does not go away, go to step 3.
3. Substitute a known-good XM antenna.
Is the error message gone?
YES - Replace the XM antenna.
NO - Substitute a known-good XM antenna lead and recheck. If the XM receiver or AcuraLink control unit (XM receiver) receives a signal, replace the original XM antenna lead. If the symptom/indication is still present, replace the XM receiver or AcuraLink control unit (XM receiver).