LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2011 >> RDX AWD L4-2.3L Turbo >> Repair and Diagnosis >> Powertrain Management >> Tune-up and Engine Performance Checks >> Air Cleaner Housing >> Service and Repair

Air Cleaner Housing: Service and Repair




Air Cleaner Removal/Installation

1. Remove the battery upper bracket to avoid damaging the air cleaner.

2. Loosen the screw of the hose band (A).





3. Remove the bolts (B).

4. Remove the MAF/IAT sensor connector (C) and harness clamps (D).

5. Remove the air cleaner (E).

6. Install the parts in the reverse order of removal.

NOTE: Tighten the hose band screw (A) until the edge of the hose band (F) goes over the paint mark (G) up to 0.4 in (11 mm).

scientia non olet · About LEMON Manuals