LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2011 >> RDX AWD L4-2.3L Turbo >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Cylinder Block Assembly >> Connecting Rod >> Testing and Inspection >> Connecting Rod Bolt Inspection

Connecting Rod Bolt Inspection




Connecting Rod Bolt Inspection

1. Measure the diameter of each connecting rod bolt at point A and point B.





2. Calculate the difference in diameter between point A and point B.

Point A-Point B = Difference in Diameter






3. If the difference in diameter is out of specification, replace the connecting rod bolt.

scientia non olet · About LEMON Manuals