Sunroof / Moonroof: Adjustments

Moonroof Glass Position Adjustment

The roof panel (A) should be even with the glass weatherstrip (B), to within 0 +1/-1 mm (0 +0.04/-0.04 in) all the way around, and should be to length of between the roof panel and glass, to within 13.5 +1/-1 mm(0.55 +0.04/-0.04 in). If not, make the following adjustment:





1. Remove the bracket cover.

2. Adjust the glass (A).

1. Slightly loosen the TORX bolts with a TORX T25 bit.

2. Move the glass up or down and forward or rearward.

3. Tighten all bolts securely.





3. If necessary, repeat on the opposite side.

4. Resetting the moonroof control unit Programming and Relearning.