Symptom Troubleshooting

Symptom Troubleshooting: SRS indicator does not come on

SRS indicator does not come on

1. Connect the HDS to the DLC. Initial Inspection and Diagnostic Overview

2. Turn the ignition switch to ON (II).

3. Make sure the HDS communicates with the vehicle and the SRS unit. If it does not communicate, troubleshoot the DLC circuit. Testing and Inspection

4. Check for PGM-FI, Body Electrical, and SRS DTCs with the HDS.

Are there any PGM-FI, Body Electrical, or SRS DTCs?
YES - Go to the indicated DTCs troubleshooting.

NO - Go to step 5.


5. Do the gauge control module self-diagnostic function. Reading and Clearing Diagnostic Trouble Codes

Does the SRS indicator come on?
YES - Faulty SRS unit; replace the SRS unit. SRS Unit Replacement

NO - Faulty gauge control module; replace the gauge control module. Service and Repair