Fuel Tank: Service and Repair

Fuel Tank Replacement

1. Relieve the fuel pressure. Service and Repair

2. Drain the fuel tank, Service and Repair then disconnect the fuel tank unit 4P connector and the quick-connect fittings from the fuel tank unit.

3. Raise the vehicle on a lift.

4. Remove the exhaust pipe. Service and Repair

5. Remove the propeller shaft, Propeller Shaft Removal and support it with jackstands.

6. Remove the fuel tank guard (A) and fuel tank protector (B).

7. Loosen the clamp (C), and disconnect the tube (D). Slide back the clamps, then twist the hoses as you pull to avoid damaging them.

8. Open the clamps (E).

9. Disconnect the hoses (F).

10. Place a jack or other support under the fuel tank (G).

11. Remove the strap bolts and the straps (H).

12. Remove the fuel tank.

13. Install the parts in the reverse order of removal.