Rear Fender Liner: Service and Repair

Rear Fender Cover Replacement

NOTE:

- Put on gloves to protect your hands.

- Take care not to scratch the body and related parts.

1. Remove the rear fender cover (A).
-1 Remove the screw (B) that secure the fender cover and the rear strake (C) from the front of the rear wheel arch.
-2 Remove the screws (D, E) and clip (F) that secure the rear bumper (G) and fender cover from the rear of the rear wheel arch.
-3 Remove the bolts (H) and clip(s) (I) from the rear wheel arch.
-4 Pull out the rear fender cover.

2. Install the fender cover in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.

- Push the clips into place securely.

Left





Right