B1002

DTC Troubleshooting: B1001, B1002

DTC B1001: MICU Internal (CPU) Error

DTC B1002: MICU Internal (EEPROM) Error

NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A. Troubleshooting - B-CAN System Diagnosis Test Mode A

1. Clear the DTCs with the HDS.

2. Turn the ignition switch to LOCK (0) and then back ON (II).

3. Wait for more than 6 seconds.

4. Check for DTCs with the HDS.

Is DTC B1001 and/or B1002 indicated?
YES - Faulty MICU, replace the under-dash fuse/relay box.

NO - Intermittent failure, the system is OK at this time.